Home	RDP Sales	Contact Us	Training
RDP Support		Open a Web Support Ticket
RDPWin Knowledge Base	RDP-DOS Knowledge Base	IRM and IRM.Net Knowledge Base	Crystal Knowledge Base

Cannot Load VDM-IPX/SPX Support and Bindery Failure

Added 7/18/03 - Article ID#: K000172

When converting a network from Novell to Windows, there can be many lingering effects on workstations. RDP strongly suggests that all workstations that have ever had any version of the "Novell Client" install are completely reformatted. This is the only way to completely eliminate all the bad effects of this client.

If you elect to not reformat the workstations, you can attempt to un-install the Novell Clients. Most likely this will be a disaster, since uninstalling the client does not remove everything. One lingering Novell element can cause two problems in RDP.

When starting RDP you may see the following error message (watch carefully because it flashes on screen for just a moment): “Cannot load VDM-IPX/SPX Support”. While not a problem for RDP launch or use, this is an indication of Novell remnants.

When adding a new printer in RDP the following error message appears: “Bindery Failure Error”. Again, this is not detrimental to the process of adding a printer. You can simply enter past this error message and continue to add a printer. However, since most people are disturbed by error messages, it is best to fix the problem generating the error.

Solution

Both of these problems can be addressed by the same fix. We suggest reformatting the workstation and re-installation of the operating system. This is the only way to complete remove novell. Alternatively, on any workstation that demonstrates these problems, start NOTEPAD and browse to Windows (XP) or WINNT (2000) folder where the file \system32\autoexec.nt. Open this file and delete the following lines of text:

    REM Install network redirector
    lh %SystemRoot%\system32\nw16
    lh %SystemRoot%\system32\vwipxspx

Save the document and reboot the workstation.

Supported Environments as of 8/17/2007
Workstations	All workstations must use either Windows XP Professional or Windows Vista (Business or Ultimate) with all service packs installed . RDP no longer supports Windows 95, 98, ME, or 2000 Workstations. For RDPWin, a minimum of 1 GB of RAM and a Pentium 3GHz processor or faster are required.
Servers	The data server must be Windows 2003 or 2008 32 bit (not 64 bit) with all service packs installed and at least 4GB of RAM. RDP no longer supports Novell Netware Servers. Feel free to call RDP Support at 970- 845-7108 with any hardware questions.
Pervasive	The Pervasive database must be Version 9.52 or higher with all Service Packs installed. See Pervasive Overview.
Printing Issues	RDPWin supports all standard Windows Printing environments. Our legacy RDP-DOS system may not be able to print if the printer is USB, TCP/IP or wireless. Additionally, printing remotely with Terminal Services or Citrix may not work with RDP-DOS.
NetMeeting or Remote Desktop	To provide the highest level of support, RDP requires access to your system with Remote Desktop or Microsoft NetMeeting. Carbon Copy and other remote tools are not supported. See Hardware Requirements for more details.
RDPWin	RDPWin is our Microsoft .Net Windows-based software. It accesses the same database at the same time as your existing RDP-DOS and Internet Reservation Module (IRM). Please review: RDPWin Overview. Adding RDPWin to an Existing Legacy RDP-DOS System.
For more information see Hardware Requirements.

Home	RDPWin	RDP-DOS	IRM/IRM.Net	Open A Web Support Ticket
	Version 2.xxx	Upgrade to RDPWin	Link to Marketing Site	Contact Us
	Training	Vendor Interfaces	Troubleshooting	RDP Sales Website