Available Topics
Add Confirmation Type
Additional Default Attachments
Change Confirmation Type
Default Crystal Report Attachment
Default E-mail Body Choices

Overview

Confirmation Settings is where the default settings by Confirmation Type are configured and saved for each resort. The settings for Resort 01 are different than Resort 02. Double-click on a Confirmation Type row to open a screen allowing additions and changes to be made. Confirmations can be configured with any name and designated as active or not.

Access this tab to view the settings for each Confirmation Type in the system. Columns available in the grid are Disabled, Confirm Type, Subject, Add Res#, From, CC, BCC, and E-mail Body Type. The area below the grid displays detail of the Confirmation Type selected in the grid. To change any of these settings, double-click on a grid row. Default Confirmation Types available are: Arrival, Cancelled Res, ChangedRes, Deposit Due, DepositReceived, Group, GuestHistory, NewRes, Owner, Send One, and Agent. These are the confirmation sent throughout the system. For example, after making a new reservation, click the Print, Email or Preview button for confirmations on the Continue With screen to send the configured confirmation report for new reservations.

Active Column

When checked, the Confirmation Type screen offers only configured AND active standard or custom confirmation types.

"Mass E-mail Tab" Column

View to which Mass E-mail tab the confirmation is related.

Add Button

Click the Add button to open a blank confirmation form. Enter the appropriate Settings Label, From (default e-mail address), CC default e-mail address, Blind CC default e-mail address (if any), and Subject line. Designate reports to attach or include in the body, or type in a default body text. Assign additional default attachments. When complete, click Save or Save & Close.

Multiple confirmation settings can be created for each master (Owner, Agent, Group, and Guest History). New master confirmation reports must be created (Owner2, Owner3, Agent 2, Agent3, etc.). For example, OwnerEmailLetter exists in the RDPWin demo data. Create Owner2EmailLetter and Owner3EmailLetter in the RDP/1202/Reports10/Owner folder. Click the Add button on the Reporter Configuration Confirmation Settings tab and create the Owner2 confirmation setting such as the one shown here.

Change Button

Click the Change button to open the settings form for the selected confirmation type. For example, select the Res - Confirm 1 (default label) and click Change to open the following sample screen:

Name

Change or review the label (up to 20 characters) in textbox to describe the confirmation type such as Arrival, Cancel, Change, Deposit Due, Deposit Received, and New Reservation. Confirm1 sends a single email to a guest, while the other confirmations are set up to send multiple e-mails such as Agent or Dep. Due (all reservation with a deposit due based on configured settings.

"From" E-mail

View the default e-mail address to be shown in the From box of the e-mail. This address is also where any reply e-mails are received. If the From field is blank on this screen, the default shown here (entered at the upper E-mail Configuration level) is used.

CC

Enter or view the default e-mail address for the "CC" (carbon copy) e-mail for the selected Confirmation Type. When sending e-mails from RDPWin for whatever reason, the recipient can view who received a copy of the e-mail by the address in the CC field. If the "CC" field is left blank on this screen for any Confirmation Type, the default (entered at the upper E-mail Configuration level) is used.

Blind CC

Enter the default e-mail address for the "BCC" (blind carbon copy) e-mail for the selected Confirmation Type. The recipient is not made aware of any copy sent to the address in the "BCC" field. If the "BCC" field is left blank on this screen for any Confirmation Type, the default (entered at the upper E-mail Configuration level) is used.

Subject

Add Res# to Subject

When checked, the reservation number for each reservation is automatically added to the Subject field on the e-mails for the selected Confirmation Type. The Res# can be entered/changed on an individual confirmation basis if desired. When not checked, the reservation number is not referenced in the Subject line for that Confirmation Type.

Crystal Report Attachment (PDF or Word)

Select the Crystal Report to attached as the main attachment for this confirmation. Enter the path of the report (RDPNT/RDP/Reports10/Confirmations/CancelRes.rpt) or click the Browse button to locate the desired report. Once selected, click the Preview button to view a sample of the report. RDP suggests this attachment should be a custom report. RDP standard reports are updated often for many functional reasons and could be overwritten during RDPWin updates. RDP standard reports can be copied to a new name and modified.

The Crystal Report is attached to the e-mail as either an Adobe PDF file, a Microsoft Word file, or without format. RDP recommends using PDF format to better protect against changes by the guest on personal computers. When sending a PDF formatted confirmation, the Adobe website should be referenced (www.Adobe.com) since the PDF Reader may not be installed on all computers. This is a free download available on all computer platforms.

E-mail Body Choices

Configured these fields pertaining to the e-mail body of the selected Confirmation Type.

None

Select this radio button to set the default to have a blank e-mail body.

Crystal Report to be Exported to Body

Select to enable the Crystal Report for E-mail Body field. Click Browse to make selection and Preview to view a sample of the report. The first time a report is viewed, the report takes a little longer to display. Click Preview to view a sample of that report. Users should be browsing the RDPNT/RDP/Reports10 folder for selection.

Enter Text for Body

Select to enable the "Text for E-mail Body" section. Enter the text to be displayed in the body of the e-mail. This text should refer to the attached confirmation. The information can be entered or changed each time in the confirmation screen.

Crystal Report for E-mail Body

When Crystal Report to be Exported to Body is selected, this field is enabled. Click Browse to make selection and Preview to view a sample of the report. The first time a report is viewed, the report takes a little longer to display.

Text for E-mail Body

Enabled when Enter Text for Body is selected, type in the default text to display in the body of the selected e-mail confirmation type.

Default Attachments

The Crystal Report Attachment report is attached first to the e-mail confirmation, but additional attachments, such as directions, graphical maps, etc., can also be attached. When common files are sent the selected confirmation type (guest history, groups, etc), use the Browse button to locate and attach the documents as additional default attachments. This sets the defaults and can each can be changed when sending e-mails. The fields in the list are:

File Name: Remember to consider the software typically available on most computers when adding attachments. For example, Adobe Acrobat and Microsoft Word are installed on most computers; however, Corel Word Perfect may not be available.
Date: Confirm the correct version of the file is being sent.
Size: Guests connect to the internet at different speeds, so larger attachments take longer to download.

RDPWin confirmations can include attachments of any type such as maps, cancellation policies, and room descriptions. Confirmations and attachments should be customized for guests with virtually unlimited formatting. RDP highly recommends exporting all confirmations as Adobe PDF formatted attachments to avoid allowing the guest the make changes using Word or other software packages to rates, dates, and other important information.

Some things to know about Adobe attachments:

Exporting Word documents into Adobe requires the purchase of Adobe Standard edition from www.provantage.com for approximately $262.79 (Part# 22001979, "Acrobat v7.0 Standard for Windows 1-user").
Adobe acrobat (PDF) files are much smaller than the Word original which saves valuable download time. For example, 1.64 MB Word document is approximately .394 MBs in Adobe, which is about 80% smaller.
Adobe files are read-only. Word documents can be easily altered. Send PDF files to disallow changing the rates on confirmations sent as Word documents.
The visual presentation of confirmations in Word versus Adobe is identical. There is no visible difference in layout to the recipient.
Adobe documents are easily printed.

Add Attachments

To add additional attachments to the list of default inclusions, click the Browse button, navigate to the desired folder and select a report. Multiple files can be select by holding down the Control key and clicking on multiple files.

Remove and Remove All

To remove one or more files from the default list, select a file in the list and click the Remove button. Click "Remove All" to clear the additional attachments.

Save

See Save, Save & Close, Close, and Reset for more details.

Click these links for Frequently Asked Questions or Troubleshooting assistance.

Last Updated 09/03/2008

Reporter - Configuration - Confirmation Settings Tab

Overview

Save